FTSF

AMCA Approved SWSI Multi-vane Forward-curved Centrifugal Fan

Excl. VAT

Licensed to bear the AMCA Seal for Sound and Air Performance and Fan Efficiency Grade (FEG)
Total pressure from 200 Pa to 1500 Pa
Operating ambient temperature of up to +40°C
Available in 3 versions: Standard (S), Heavy duty (H) & Impeller overhangs bearing pedestal (P)
Each fan comprises a housing unit, impeller, bearing and shaft
If motor is required IP55 protection is standard, Class F insulation with Class B temperature rise
Totally enclosed squirrel cage induction motors

SKU: EFAP-86

Got a question about this product?

Email us or call us on +603 7846 0340 (Malaysia)
or +91 33-24988126 (India)

Compatible Accessories

Overview

The FTSF Series of SWSI multi-vane forward-curved centrifugal fans is available in 12 sizes ranging from 280 mm to 1000 mm and are capable of airflow rates of 700m³/h to 70,000m³/h.

Downloads

Product Overview

Features and Benefits

Design

Designed to achieve aerodynamic inlet conditions and can be customised to be built to suit one of the four discharge positions.

Protection

Inlet flange, outlet flange and thermal protection for motors is available upon request

AMCA Approved

Elta Fans Malaysia Sdn Bhd certifies that the FTSF Series fans shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

Specification

Construction

Shafts undergo stress relief and heat treatment process and are designed to operate at 1.4 times the maximum running speed. Scroll is joined to the side plates through spot welds or Pittsburgh seam. Frames for H and P versions are finished in polyester coating. Bearings are either sealed and maintenance-free or have lubrication fittings and are of high quality to minimise noise levels.

Casing

The FTSF Series is housed in galvanised steel. H and P versions have additional steel plates welded to angled iron frames for enhanced rigidity and strength. The fan shaft is made of carbon steel and coated to resist corrosion.

Impeller

The advanced aerodynamic forward curved impeller is made of high-grade galvanised steel and is welded using a high precision machine, balanced to ANSI/AMCA 204-05

Motors

The totally enclosed squirrel cage induction motors are designed for high efficiency and low power consumption. If motor is required IP55 protection is standard, Class F insulation with Class B temperature rise.

Hello Joe

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.