HCA

Short Cased Axial Fans

  • Finished in a tough epoxy paint to protect against corrosion.
  • Suitable for duct mounted applications.
  • The compact design allows for easy installation especially within restricted spaces.
  • Highly efficient external rotor motors.
  • Very efficient for moving high volumes of air at relatively low pressures.
  • Motors and impellers are balanced to Grade G6.3.
  • Motor mounting brackets are constructed within welded wire framework.
  • The mounting brackets are electroplated prior to black epoxy powder coating to provide added protection.
  • Suitable for operating temperatures of up to +55°C and up to 95% humidity.

Quantity

Got a question about this product?

Email us or call us on +603 7846 0340 (Malaysia) or +91 33-24988126 (India)

Find your local distributor
Click here to search now

Compatible Accessory Ranges

Please refer to Product Overview in Downloads for accessory size guide

MF/CMF – Axial Fan Matching Flanges

MF/CMF – Axial Fan Matching Flanges

Rubber-In-Shear Mounts

Rubber-In-Shear Mounts

F/CFT – Axial Fan Mounting Feet

F/CFT – Axial Fan Mounting Feet

AVA3.0 – Speed Controller

AVA3.0 – Speed Controller

AVA5.0 & AVA8.0 – Speed Controller

AVA5.0 & AVA8.0 – Speed Controller

Overview

The short cased HCA Series are compact, lightweight units designed around an advanced, high performing impeller. Suitable for a wide range of air supply and discharge applications. Can be used for a duct mounted ventilation system. HCA axial fans offer a wide operating angle making them suitable for mounting in any position enabling greater flexibility for site installations. Available in 5 standard sizes from 315 to 500mm, either single or three phase.

Features and Benefits

Design

The HCA short cased axial fan has a compact design allows for easy installation especially within restricted spaces. The fan can be mounted at any angle and is suitable for duct mounted applications. Motor mounting brackets are constructed within welded wire framework.
Condensation drainage holes are built into the motors as standard. These remove the build up of condensation within the motor when operating in humid surroundings or from considerable changes in temperature.

Efficiency

The units have highly efficient external rotor motors. This makes them very efficient for moving high volumes of air at relatively low pressures.

Protection

Models 315 to 500 (single phase and three phase) have Integral thermal overload protection. They are finished in a tough epoxy paint to protect against corrosion. All motors are pre-wired to an IP54 terminal box. Built-in integral thermal overload protection which prevents the motor from overheating.

Testing

All units have been tested to ISO 5801:1997 (airside performance) and BS848 Part 2:1985 (sound performance).

Quality Management

Motors and impellers are balanced to Grade G6.3.

Warranty

Comes with a 12 month warranty as standard.

Specification

Construction

All models are finished in a tough epoxy paint to protect against corrosion. Guards are electroplated prior to painting and finished in an epoxy polyester paint RAL 9005 Black. All motors are pre-wired to an IP54 terminal box with side guard. Mounting plate is manufactured in powder coated steel. Motor mounting brackets are constructed within welded wire framework. The brackets are also electroplated prior to black epoxy powder coating to provide added protection.

Impeller

These lightweight units are designed around an advanced, high performing impeller. Suitable for a wide range of air supply and discharge applications. All impeller blades are pressed steel sickle bladed type with epoxy painted colour RAL 9005 black and welded to the motor rotor.

Motor

The fans are built with external rotor motors with sealed for life, maintenance free, ball bearings enabling the fan to be mounted at any angle. The motor requires an electricity supply of 230V (single- phase) or 400V (three phase), 50Hz. The motors have Class F insulation, suitable for ambient operating temperatures of up to +55° C and 95% humidity. Motors and impellers are balanced to Grade G6.3. Rated IP44 which means they are highly resistant to dust and water ingress. Suitable for speed control.

Condensation Drainage

Condensation drainage holes are built into the motors as standard. These remove the build up of condensation within the motor when operating in humid surroundings or from considerable changes in temperature.

Typical Applications

Airport Terminals
Airport Terminals
Banks
Banks
Bowling Alleys
Bowling Alleys
Call Centres
Call Centres
Canteens and Food Courts
Canteens and Food Courts
Car Showrooms
Car Showrooms
Care and Nursing Homes
Care and Nursing Homes
Cinemas
Cinemas
Colleges and Universities
Colleges and Universities
Commercial Kitchens
Commercial Kitchens
Dark Rooms
Dark Rooms
Dental Surgeries
Dental Surgeries
Departmental Stores
Departmental Stores
Fast Food Outlets
Fast Food Outlets
Fire and Police Stations
Fire and Police Stations
Go Karting Tracks
Go Karting Tracks
Government Buildings
Government Buildings
Gyms
Gyms
Hospitals and Hospices
Hospitals and Hospices
Ice Rinks
Ice Rinks
Indoor Play Centres
Indoor Play Centres
Laboratories
Laboratories
Laundrettes and Dry Cleaners
Laundrettes and Dry Cleaners
Law Courts
Law Courts
Libraries and Archives
Libraries and Archives
Mobile Classrooms
Mobile Classrooms
Mortuaries
Mortuaries
Museums and Galleries
Museums and Galleries
Nail and Beauty Salons
Nail and Beauty Salons
Nurseries
Nurseries
Office Buildings
Office Buildings
Operating and Mobile Theatres
Operating and Mobile Theatres
Petrol Stations
Petrol Stations
Pharmacies
Pharmacies
Places of Worship
Places of Worship
Portable and Temporary Offices
Portable and Temporary Offices
Prisons and Detention Centres
Prisons and Detention Centres
Restaurants and Bars
Restaurants and Bars
Schools
Schools
Shopping Centres
Shopping Centres
Spas
Spas
Sports Centres
Sports Centres
Stadiums and Arenas
Stadiums and Arenas
Student Accommodation
Student Accommodation
Supermarkets
Supermarkets
Swimming Pools
Swimming Pools
Telecoms Buildings
Telecoms Buildings
Theatres
Theatres
Theme Parks
Theme Parks
Town Halls and Community Centres
Town Halls and Community Centres
Train and Bus Stations
Train and Bus Stations
TV and Recording Studios
TV and Recording Studios
Veterinary Clinics
Veterinary Clinics
Interested? Make an Enquiry

Customers Also Viewed

AVA5.0 & AVA8.0 – Speed Controller

AVA5.0 & AVA8.0 – Speed Controller

CBD – Backdraft Shutters

CBD – Backdraft Shutters

EC Controller – Temperature Controller
EC

EC Controller – Temperature Controller

EC Sensors – Differential Pressure Switch
EC

EC Sensors – Differential Pressure Switch