Minivent
Axial Roof Unit
- Robust, lightweight construction.
- Wide choice of speeds for most sizes.
- All motors are speed controllable.
- Can be used on ducted systems.
- Can be mounted at angles up to 30°.
- Backdraft shutters can be fitted to fans 250 to 350mm diameter.
- Units for supply air applications can be supplied. Refer to the Alpha supply range.
Got a question about this product?
Email us or call us on +603 7846 0340 (Malaysia) or +91 33-24988126 (India)
Find your local distributor
Click here to search nowCompatible Accessory Ranges
Please refer to Product Overview in Downloads for accessory size guide
Overview
The Minivent Series of axial roof units has been designed for use in a wide range of free intake or ducted exhaust air applications. They can be speed controlled and are available in 6 sizes ranging from 112 to 350mm diameter.
- Product Overview
Downloads
Features and Benefits
Design
This series has been constructed with a robust yet lightweight design to be used in a wide range of free intake or ducted exhaust air applications. The units can be mounted at angles up to 30°.
Weather Resistance
Mushroom cowls limit water ingress in a range of weather conditions.
Protection
MV112 and 132 are impedance protected. MV202 and above are fitted with thermal contacts as standard.
Testing
All units are tested to BS848:Part 1, 1980 (airside performance) and BS848:Part 2, 1985 (sound performance).
Specification
Casing
Cowls are of UV-stabilised injection moulded plastic. Backdraft shutters can be fitted to fans 250 to 350mm diameter.
Impellers
The impellers are of powder coated galvanised steel.
Motor
The fans are built with a squirrel cage external rotor induction motor with sealed for life ball bearings. The motor requires an electricity supply of 230V, single-phase, 50/60Hz. Motor is rated IP44.
Control
Fan units are speed-controllable.