Profile Fan

Roof Mounted Units

Available with high pressure backward-curved centrifugal impellers and high airflow axial impellers.
Axial version available as supply or exhaust unit, centrifugal version available in exhaust only.
Easy to install by simply cutting hole in roof and fixing fan with tek-screws.
No need for costly upstands and flashing.
To weather proof simply add a bead of silicone around metal deck and roof.
Inlet spigot available for ducted installations.
Fits onto most metal-deck profiles.
Lightweight but sturdy construction.
Can be mounted at angles up to 30°C.
A Relief Air Vent is also available (model PFR30).

SKU: EFAP-42

Got a question about this product?

Email us or call us on +603 7846 0340 (Malaysia) or +91 33-24988126 (India)

Overview

The Profile Roof Fan has been developed to reduce the installation costs of roof mounted units by eliminating the need for an upstand. They are simple to install, require no additional flashing and are available in most metal-deck profiles. There are 2 sizes in the range and these fans are available with axial flow and backward-curved centrifugal impellers.

Downloads

Product Overview

Features and Benefits

Design

The Profile Roof fan has a lightweight but sturdy construction. It has been designed for easy installation, simply cut a hole in the roof and fix the unit with tek-screws. It removes the need for costly upstands and flashing. Inlet spigots are available for ducted installations. The unit fits onto most metal-deck profiles and can be mounted at angles up to 30°C.

Weather Proof

To weather proof simply add a bead of silicone around metal deck and roof.

Protection

Internal Thermal Contacts as standard.

Testing

All units are tested to BS848:Part 1 1980 (airside performance) and BS848:Part 2, 1985 (sound performance).

Specification

Construction

The cowl, base and inlet spigot are all made from UV-stabilised plastic, steel components and have a corrosion resistant finish. The Profile Rood fan Includes either axial flow or backward-curved centrifugal impellers as needed.

Motor

The fans are built with external rotor, squirrel cage induction motors with sealed for life ball bearings. The motor requires an electricity supply of 230V, single-phase, 50/60Hz.